The winner will be randomly selected from correct entries and awarded $50. Entries must be received by the end of the month. Only one winner will be selected. Chances of winning are dependent upon the number of correct entries received. Employees of Babcox Media, industry manufacturers and BodyShop Business advertisers are not eligible to enter.
The winner will be randomly selected from correct entries and awarded $50. Entries must be received by the end of the month. Only one winner will be selected. Chances of winning are dependent upon the number of correct entries received. Employees of Babcox Media, industry manufacturers and BodyShop Business advertisers are not eligible to enter.
Popular Posts Auto Body Profit: The Squeeze is On Auto Body Welding: Look Before You Weld Why Haven't We Seen a Major Increase in Labor Rates Yet? Automotive Refinish: Avoiding Paint Redos, Part 1 Auto Body Shop Succession Planning: Having a Vision Connect with us advertise with us
Auto Body Profit: The Squeeze is On
Auto Body Welding: Look Before You Weld
Why Haven't We Seen a Major Increase in Labor Rates Yet?
Automotive Refinish: Avoiding Paint Redos, Part 1
Auto Body Shop Succession Planning: Having a Vision
Popular Posts Auto Body Profit: The Squeeze is On Auto Body Welding: Look Before You Weld Why Haven't We Seen a Major Increase in Labor Rates Yet? Automotive Refinish: Avoiding Paint Redos, Part 1 Auto Body Shop Succession Planning: Having a Vision Connect with us advertise with us
Auto Body Profit: The Squeeze is On
Auto Body Welding: Look Before You Weld
Why Haven't We Seen a Major Increase in Labor Rates Yet?
Automotive Refinish: Avoiding Paint Redos, Part 1
Auto Body Shop Succession Planning: Having a Vision
Sponsored By Transtar Autobody Technologies
Thinking Outside the Bedliner: Additional Profit Opportunities for Protective Coatings
When most automotive companies think of protective coatings, they think of truck bedliners. But maybe they should be known as "problem-solving coatings" because they have 1,001 potential applications.
Today's body shops and parts distributors are missing a lot of opportunities -- not just with traditional two-component sprayable bedliners, but also with some of the alternative applications for these coatings.
In this 60-minute webinar, our experts will show you how automotive businesses around the country have established an additional profit center by using protective coatings -- in both traditional and non-traditional ways. This presentation will be an "idea starter" that can help you find additional money-making opportunities for your business.
Speakers Dan Reutter, Technical Specialist, U-POL Mark Thomas, National Training Manager, U-POL Jason Stahl, Editor, BodyShop Business
Sponsored By Transtar Autobody Technologies
Add Your Listing Edit Your Listing By Category Profit Centers Bedliners & Bedliner Franchises/DealershipsCar RentalConsolidatorsFranchises & NetworksPaintless Dent Repair Equipment, Services, Training & FranchisesVehicle Upgrade, Trim & Accessories Refinishing Air Supply SystemsBooth AccessoriesClean Air/Shop EnvironmentCleaning & RecoveryCompressed Air SystemsDetail EquipmentDetail Products & CleanersDrying & Curing Lights/SystemsGun PartsMasking ProductsPaint & Paint ProductsPaint SafetyPaint-Mixing SystemsPrep & Surface ProductsPrep EquipmentPrepstationsSpray Guns & PaintingSpraybooths, Prep Stations & Related Equipment Repair A/C Equipment & SuppliesAdhesivesBody Parts & AccessoriesDimension/MeasuringFrame Straightening & AlignmentGlass/Windshield Repair & ReplacementHand ToolsHeat Guns/Heat ToolsLifts & JacksMechanical Parts & AccessoriesMetal Finishing/FillingPlastics & Plastic RepairPower Tools/Electric & AirScan ToolsService EquipmentStorageVin Certification LabelWelding Equipment & ProductsWelding Safety Shop Management & Operations Advertising & Marketing ServicesCleanup ProductsClothingComputerized Office & Information SystemsInformation, Training & CertificationInternet & Web-Enabled ServicesManagement & Financial ServicesMiscellaneous Training Training: Carbon Fiber Structure Repair
Add Your Listing Edit Your Listing By Category Profit Centers Bedliners & Bedliner Franchises/DealershipsCar RentalConsolidatorsFranchises & NetworksPaintless Dent Repair Equipment, Services, Training & FranchisesVehicle Upgrade, Trim & Accessories Refinishing Air Supply SystemsBooth AccessoriesClean Air/Shop EnvironmentCleaning & RecoveryCompressed Air SystemsDetail EquipmentDetail Products & CleanersDrying & Curing Lights/SystemsGun PartsMasking ProductsPaint & Paint ProductsPaint SafetyPaint-Mixing SystemsPrep & Surface ProductsPrep EquipmentPrepstationsSpray Guns & PaintingSpraybooths, Prep Stations & Related Equipment Repair A/C Equipment & SuppliesAdhesivesBody Parts & AccessoriesDimension/MeasuringFrame Straightening & AlignmentGlass/Windshield Repair & ReplacementHand ToolsHeat Guns/Heat ToolsLifts & JacksMechanical Parts & AccessoriesMetal Finishing/FillingPlastics & Plastic RepairPower Tools/Electric & AirScan ToolsService EquipmentStorageVin Certification LabelWelding Equipment & ProductsWelding Safety Shop Management & Operations Advertising & Marketing ServicesCleanup ProductsClothingComputerized Office & Information SystemsInformation, Training & CertificationInternet & Web-Enabled ServicesManagement & Financial ServicesMiscellaneous Training Training: Carbon Fiber Structure Repair
BodyShop Business is the leading source of information for the collision repair industry. Through digital avenues such as videos, podcasts, webinars, e-newsletters, social media and more, plus a monthly print magazine, BodyShop Business delivers content on business management, vehicle repair, industry trends, breaking news and more that collision repair facility owners and managers need to stay current on the rapidly changing auto body world.
BodyShop Business is the leading source of information for the collision repair industry. Through digital avenues such as videos, podcasts, webinars, e-newsletters, social media and more, plus a monthly print magazine, BodyShop Business delivers content on business management, vehicle repair, industry trends, breaking news and more that collision repair facility owners and managers need to stay current on the rapidly changing auto body world.
ByCarl Wilson Wilson on July 21, 2017
ByCarl Wilson Wilson on April 18, 2022
ByCarl Wilson Wilson on December 30, 2020
Does wheel alignment factor into ADAS and autonomous features?
Why it's important to keep with vehicle technology and training.
News: PA First Responders Learn New Skills through NABC F.R.E.E. Program
News: Top 5 Stories of the Week
News: Videos of the Week
Click here to view past issues.
Get the latest news, insights, and more delivered directly to you inbox.
There are specific habits a painter can adopt to increase efficiency. And there are areas any shop can improve upon to increase overall efficiency.
Carl Wilson has over 30 years in the industry as a painter and technical rep.
A closer look with adequate light can reveal ragged body filler edges or overly aggressive scratches prior to priming.
We all operate daily by way of habitual behavior. Every one of us. We get up, brush our teeth, feed the cat, let the dog out, make the coffee, etc., and then make our way to the shop. There are countless activities we do on auto-pilot. We don’t even think about what we’re doing. Naturally, there’s some freelance thinking involved as well. After all, we’re not drones. But much of what we do is simply habitual.
While we do the same thing nearly every day – paint cars – there are no identical crashes/repairs/refinishes for us to duplicate time after time. This is where the freelance thinking comes in; the evaluation each new RO/vehicle we encounter in the paint shop requires, and the subsequent evaluation of each task necessary to deliver the vehicle to a pre-accident condition. Oh, and of course the goal is to achieve this as fast as possible. For the flat-rate painter, to flag as many hours as possible. For the shop, to process more cars faster. Both tempered with a quality mindset to ensure procedural accuracy and doing the job right the first time.
We’ll discuss habits of efficiency in the micro – with the benefit toward the painter/prepper – but also in the macro, for the shop’s benefit. Not to get too philosophical, but hopefully the general attitude of the painter is something along the lines of, “What can I do differently to impact my productivity?” followed by, “How can I impact the shop positively?” Likewise, a healthy culture in the shop and leadership aimed at promoting an ICAN (Improvement, Constant and Neverending) environment exists in such a manner that no painter or body tech is an island unto himself, but rather all are manning an oar in concert with everyone else in the boat. Think about a sports team, where individual talent benefits the player’s personal stats and salary negotiation, and at the same time the team’s chances of a championship.
So what are we talking about, Carl? Well, there are specific habits a painter can adopt to increase efficiency. But before we drill down on them, let’s consider a couple of areas any shop can improve upon to increase overall efficiency.
By and large, the greatest impact will be meaningful communication. In a perfect world, every bit of related and unrelated damage would be documented and communicated with the customer, the adjuster, the parts person, the body tech, the painter and detailer. I know it’s not a perfect world and, for many reasons, it’s not possible to achieve that all of the time. However, we can adopt certain habits to improve upon our existing communication. For example, 100-percent teardown, while still resisted by some, has unquestionably proven its worth. It allows us to reveal and document every bit of damage and every part necessary to restore the vehicle back to pre-loss condition. Additionally, every labor operation required is also revealed. This one habit alone will improve the shop’s cycle time.
When shop leadership adapts the habit of organization, it has a snowball effect. This translates to a more efficient work space, and tools are where they should be. Standardization of materials keeps inventory SKUs minimal. Min-Max inventory control systems keep us from running out without having year-old inventory on the shelf. It’s not possible to have bottom-up culture changes that have any lasting effect; this requires top-down leadership.
Now, onto the meat and potatoes: habits we can adopt in the paint shop to increase efficiencies.
This habit of looking ahead and anticipating requires forethought and planning. There will likely come a time when certain operations become second-nature and no conscious planning is required, but this is a benefit of repetition and experience and takes time to develop.
As a simple and common example, when a chipguard operation happens in the booth, that’s checkers. I can’t think of any wet-on-wet chipguard products that are available. So 30 to 60 minutes of booth-cycle time is likely wasted, which adversely affects our production efficiency. Chess, on the other hand, is anticipating the need for chipguard and controlling the timing of application so the required dry time doesn’t interfere with booth efficiency.
Another habit that should be adopted is inspecting the body work prior to priming. I realize nearly everyone will claim it’s already being done in their shop, but I challenge any painter/owner/shop engaged in collision repair with cycle-time considerations to tell me they don’t fix body filler pinholes in the primer in the paint shop on a regular basis. Nearly all shops do due to how easy it is to see the pinholes after they’re primed. I submit that a better inspection would detect the pinholes so they can be addressed prior to priming; otherwise, we ask the primer to do something it not only wasn’t designed for but most times will fall short.
It starts with the body man blowing all the filler dust from sanding off the repair and taking a close look with adequate lighting – and putting on the reading glasses, if necessary. But it really falls on the painter to ensure that what he’s priming is really ready. Finding and fixing any pinhole or overly aggressive scratches before priming is a chess strategy.
Covering any openings helps keep the interior clean and reduce detailing costs.
When you produce more than can be worked on, it’s a result of resources being used inefficiently. There are times when this may seem counterintuitive, such as batch priming in order to minimize the mixing of primer and cleaning the spray gun. It may seem like getting the most out of this particular operation is more efficient, but the reality is that touch-time production is compromised in order to facilitate this over-production of priming. Every time study done bears this out.
Before 2K primers dominated the market, lacquer primer was present in every shop. Typically, a dedicated primer gun that was always full of primer was hanging around, and jobs were primed as soon as the body work was done. Due to the drying characteristics of 2K primers compared to lacquer primer – molecular crosslinking requiring a cure time verses evaporation of solvent – we found we had to clean our spray equipment every time we used it, whereas with lacquer primer we didn’t. It doesn’t happen too often these days, but during the 2K introduction days, many a gun full of primer kicked off and required a laborious cleaning session. I don’t mention this to advocate a return to lacquer primer; I’m just making the case as to why we started batch-priming.
It was/is typical for a shop to start prepping, masking and priming 60 to 90 minutes before the end of the day. Multiply that by how many bodies there are in the paint shop and you see the lost man-hours of production. In the big picture, it would appear that we are simply trading man-hours here for man-hours there and that it all comes out in the wash. But it only seems that way. It’s been demonstrated time after time that when we prime what we need now, and keep that vehicle in production, we cycle it through faster. We increase our touch-time in the paint shop, which typically decreases our overall cycle time. If you really want to see a game-changer, try a UV curing system where it literally takes longer to spray a couple of coats of primer than it does to cure the product for sanding.
Check the color at the point of the blend before you prep the panel.
Most of us want to do a given task with the fewest steps possible. In spite of that, most of us tend to keep our “pet” procedures that we’ve always done. In fact, not everyone even asks the question, “How can I do this task faster?” Those who do will develop or adopt standard operating procedures (SOPs). There’s no question that SOPs can increase efficiency; the question is, “What SOPs?” or “What habits of efficiency?” Here are a few to consider:
Painting car parts off the car allows for a single spray operation for edges and exterior.
Enlist those who have gone before you. Whether you implement kaizen, theory of constraints or Ben Franklin’s 13 virtues, there is nothing new under the sun and someone somewhere has already slain the dragon you’re fighting.
Remember, it’s not magic, and we still live in the real world where the solution to every problem creates a new opportunity elsewhere. Once you see an improvement in the paint shop’s efficiency, you’re going to have to figure out how to put those vehicles back together faster because the bottleneck will shift. And processing the cars through the paint shop faster is a pretty good habit to have.
Refinish: PPE and COVID-19
Refinish: The Reality of PBE Value-Added Services
Refinish: Doctor Gun, I Presume?
Refinish: Refinish: Separating Your Body Shop from the Competition