TX7004 Intelligent Fire Alarm Control Panel
            Installation & Operation Manual  
                                                                                                                 
1 Introduction 
1.1 Overview 
The TX7004 comprise of a range of analogue addressable, microprocessor based fire alarm control 
equipment to offer flexibility in both design and operation. The System is modular concept for easy 
tailoring of system design, to meet the full requirements of the project. The TX7004 Intelligent Fire 
Alarm Control Panel is designed and manufactured to meet the requirement of BS EN54 Part 2&4. 
The TX7004 is designed to provide early warning fire detection, to quickly identify the location of fire 
and provide user definable text informing the occupants of the building of potential smoke spread. 
Simultaneously, the TX7004 will alert and evacuate the occupants, and control all necessary auxiliary 
command functions such as elevator control, air handling shut down, gas shut off & damper control, 
as per the cause and effects requirements configured though Command Builder Set-up. 
The TX7004 modular construction panel, capable of supervising four [4] monitored detection loops 
expandable up to six [6] loops on standalone basis. Each loop is capable to accommodate of 254 
addressable devices of any combination with T&A protocols, namely intelligent sounder strobe 
TX7300 & intelligent sounder TX7320 complying with EN 54-3, rate of rise and fixed temperature heat 
detector TX7110 complying with EN 54-5, photoelectric smoke detector TX7100 complying with EN 
54-7, intelligent manual call point TX7140 complying with EN 54-11, intelligent reflective beam 
detector (TX7130) complying with EN 54-12, input and output module TX7200, TX7210, TX7220 
complying with EN54-18, and loop isolator TX7230 complying with EN 54-17. The T&A devices are fully 
loop powered to support saving cost of the cable. 
These systems incorporate a number of features to allow easy operation through a user-friendly 
menu. The TX7004 has a LCD touch screen and Keypad menus for alternative operation with large 
button access to operate the keypad control by fire brigade personnel providing total user-friendly 
interface for browsing and programming. Added the commission features such as colour coded 
loop mapping, dual address and device mismatch monitoring, one-man test, simplified command 
builder's configuration that has proved to be highly rated by both commissioning and service 
engineers. 
The Control Panel has multiple built-in features. The loop card has built-in surge protection and the 
communication card interface support multiple interface protocol such as USB, Ethernet, CAN Bus, 
Serial, RS485, Fiber Optic in one singe card. The panel is Built-In Printer and 160 LED Zones Indicators. 
The panel provides variety of inputs and outputs interfaces and auxiliary such as Output to Sounder, 
F.P.E., Alarm and Fault output, Relays and Power Auxiliary. 

 Feature and Benefits 
Compliance EN54-2 & N54-4 
Using advance microprocessor technology with Large memory capacity 
Enhance user interface combining LCD Touch screen and keypad access 
Support real time visual algorithm 
Enhance false alarm prevention 
Keypad and PC programming 
Support Multiple interface protocol such as USB/Ethernet/Can Bus/Serial/RS485/Fiber Optic 
Support Loop Powered devices for extra saving on cable cost 
Built-In Printer and 160 LED Zones Indicators 
Commissioning Advantage 
Auto Enrolling of Devices 
Loop Mapping with colour coding status 
Monitor device mismatch and dual address conflict 
Command Builder to create requirements for fire event scenario 
With Loop protection against power surge 
One-man test with On/Off sounder 
Programming Protection 
System Capacity 
Up to 4 loop 
Support 254 Devices/One loop (1,016 ideal) 
Network up to 512 Node 
Programmable Capacity 
Zones up to 3000 
Sounders Groups 1-1000 
Other Groups 1001- 2000 
Built-in 160 LED Zones Indicator